Custom Modular Display System – Shane S.

Personalized custom display system for Shane S. Quantity 1 purchases the complete package below. All dimensions are exterior, in width × depth × height order, unless marked as interior.

Agreed configuration and pricing (USD)

• 4 × custom Core XL-format cases, 80 × 61 × 80 cm each, arranged two wide and two high: $359 each / $1,436.
• 1 × continuous upper chamber, 160 × 61 × 50 cm: $449.
• 1 × reinforced pedestal riser, 160 × 61 × 10 cm, with concealed independently adjustable leveling feet and broad non-marking protective pads: $185.
• 1 × reinforced full-width removable/adjustable shelf for the fourth Core-format bay: $89.
• 1 × low-profile reinforced full-width removable/adjustable shelf for the upper chamber: $159.

Product subtotal: $2,318 USD. Current standard US shipping rate for this subtotal: $439, charged separately at checkout. Product plus standard shipping: $2,757 USD, before any applicable checkout sales tax. Enter the delivery address at checkout to confirm the available shipping rate. Normal carrier handling and US import/customs charges are included in the shipping fee.

Dimensions and construction

• Nominal complete exterior: 160 × 61 × 220 cm, plus final leveling/connector allowance.
• Approximate clear interior of each Core-format bay: 76 × 57 × 76 cm, before shelf hardware.
• Approximate clear interior of the upper chamber: 156 × 57 × 46 cm, before shelf hardware.
• Center aluminum frames retained between the Core-format modules. Adjoining clear acrylic side panels remain removable. Rear aluminum connectors join the modules vertically and side by side; matching connectors included.
• Riser support aligned beneath the vertical frame grid, with multiple independently adjustable support points.
• Both shelves use 10 cm adjustment increments. Reinforcement transfers the shelf load into the aluminum frame. The upper shelf and its low-profile reinforcement reposition as one assembly.
• Design targets, subject to final support confirmation: 12–14 kg evenly distributed on the reinforced 80 cm shelf; 15 kg evenly distributed on the reinforced 160 cm shelf. These targets are not final load ratings.
• Standard optical-clear acrylic panels; no certified UV-filtering upgrade. Future compatible partial shelves are not included and may be ordered separately.

Finish and lighting

Select the frame finish, interior panel finish and bottom surface below. The selection applies throughout the matching system. Soft felt is a black fitted overlay over the structural floor.

Included adjustable-white top lighting, approximately 2700K–6500K, with standard physical controller. Wiring routes through frame channels and the final power lead exits at the rear. Under-shelf lighting and smart controller upgrades are not included.

Before production

The remaining production details will be confirmed with you before manufacture: shelf panel material, thickness, usable depth and clearance loss; exact mounting positions; final shelf and upper-chamber floor capacities; approximate custom module/system weights; and the case-side anti-tip hardware and attachment arrangement. The earlier approximately 60 kg upper-floor guidance is not a confirmed rating for this revised chamber.

The leveled riser and floor must support the complete system. Wall restraints provide anti-tip protection at the upper structural frame; suitable wall-side fixings depend on the installation and should be selected by the installer. Place the heaviest collectibles in the lowest row. Production follows full payment and confirmation of the remaining specifications. Any necessary change to the agreed specification or price will be discussed for approval before production.